Tag Archive for: portrait


Use less water by reviewing barrel cleaning

Barrels are one of the most iconic symbols of winemaking, and their care and use is probably the subject of more discussion than any other single piece of equipment used by winemakers. So, how can you use less water, but still have barrels that will last and produce high quality and great tasting wine?

When we were developing the content for Water & Wine it became apparent that while both the cleaning  and hydration of barrels are major users of water, there weren’t any standard procedures that wineries could seem to agree upon. An approach adopted by one winemaker could be shunned by another. Given this, we figured the best strategy was to provide wineries with different examples of how others are cleaning barrels using less water, and some instructions on how wineries can examine their own procedures to find efficiencies.

Flat Rock Cellars in Jordan, Ontario provides a good example of how wineries can go about optimizing their procedures.

Using less water matters

Flat Rock's commitment to the environment is a driver to use less water

Flat Rock Cellars

Flat Rock’s commitment to the environment goes well beyond maintaining one of the most picturesque wineries in Niagara. They have embraced an approach to sustainable winemaking as a key part of their environmentally conscious culture. This includes  geothermal heating and cooling, gravity flow winemaking and low-impact viticulture to better manage their water and energy resources. Flat Rock relies on a well for the majority of their water supply and they treat this as a precious resource. By using water more efficiently, they can avoid trucking in municipal water (which is costly and contains high levels of chlorine) to supplement their well supply.

Flat Rock recognized that cleaning and hydrating barrels takes a lot of water and time, so any improvement they could make to become more efficient would lead to immediate paybacks and benefits. Given the investment barrels represent to a winery, they also needed to be sure any changes in their care would not have negative impacts or unintended consequences.

Figuring out how to use less water

They began by getting data by measuring how much water was being used to clean a barrel. Flat Rock’s well water first passes through a Reverse Osmosis (RO) treatment system. It is then stored in large polyethylene tanks. They are able to track the water level in the tanks before and after a barrel cleaning session to estimate the volume used. (For more information of how to measure water use visit the Water & Wine module on Water Use Monitoring)

Use less water to clean barrels with impingement nozzlesnozzles

Cleaning a Barrel with a Gamajet Nozzle

Then they began manually timing each barrel wash cycle to determine the shortest amount of time the water could be run while still achieving proper cleanliness. Using hot pressurized water helped break down lees and tartrates quicker and ozone provided an efficient means of sanitation. After adjusting the timing of each step, they had to wait a few months to make sure the barrel remained damp and clean. Eventually they settled on a 5 minute hot water rinse using a 360 Gamajet fitting followed by 1 minute rinse with ozonated water.

One of the biggest challenges they faced during this process was the amount of time it took to verify if a barrel was “clean enough” using a sight and smell approach. Swab testing of barrels might have been able to help in this regard, but would have incurred additional costs and would still take time to get results.

Savings go beyond water

As a result of this process, Flat Rock was able to use less water in barrel cleaning and maintenance by 15 per cent. Treating and trucking in less water means saving money and less concern about chlorine. More efficient barrel cleaning procedures also means that staff can do other things since they’re spending less time with barrels.

This structured approach to measuring and gathering information on how much water you’re are using, finding efficiencies and better ways of doing it, and verifying results can be applied by any winery regardless of size, and can have a big impact on your operations.

Have you found ways to use less water to maintain barrels? Please share your experience in the comments below.

Wines & Vines takes a look at winery water security in Prince Edward County

You don’t have to be in California to have water supply challenges (but it helps). A number of different factors can impact water security risks. Sometimes it’s a lack of rainfall, and sometimes it’s local geology and watershed characteristics.

Peter Mitham from Wines & Vines took a look at the challenges wineries in Prince Edward County can face when it comes to water supplies in a recent post. He talks to Johannes Braun about what Norman Hardie Winery & Vineyard is doing to improve water security and reduce risks.

Yours truly makes a cameo to talk about why a place like the County that’s surrounded by water can have water security troubles in the first place. Stay tuned because we’re hoping to release some more detailed information around that topic in the next little while.

You can read the full article on Wines & Vines here.